Horobin Limited
Midacre
Willenhall Trading Estate
Willenhall
U.K.
Telephone    : +44 1902 60 40 60
Fax Number : +44 1902 60 33 66
eMail : sales@horobin.co.uk

End of Pipe Steel Plugs - Double Seal

 Cost effective durable Steel Plug with Double Rubber Seals for the Temporary Sealing of new Pipework on Construction Sites, providing security against contamination and vermin entry. Double Seal Construction permits greater stability in the Pipeline. Also suitable for carrying out Water and Air Tests in all types of Pipelines.

Available from 50mm up to 300mm.

Pressure Plates are made of steel pressings. Bottom Pressure Plate is welded to the Waterway to give a gas tight seal.
Rubber Seals are commercial grade rubber mouldings.
Thrustwashers are fitted as standard on all sizes.
All steel components are zinc plated - corrosion resistant to 90 hours salt spray test.

Chemical resistant Rubber Seals can be supplied.

End of Pipe Steel Plugs, Double Seal - Test End - 15mm Waterway
 
Part Number
Nominal Plug Size
Plug will fit Min Pipe Size
Plug will fit Max Pipe Size
Max allowable Back Pressure
Weight of Plug
73021/EPD
50mm
50mm
63mm
30 psi
360 grams
73041/EPD
75mm
73mm
92mm
20 psi
495 grams
73061/EPD
100mm
94mm
110mm
10 psi
1.0 kilos
73091/EPD
150mm
141mm
165mm
10 psi
2.7 kilos

End of Pipe Steel Plugs, Double Seal - Test End - 25mm Waterway
 
Part Number
Nominal Plug Size
Plug will fit Min Pipe Size
Plug will fit Max Pipe Size
Max allowable Back Pressure
Weight of Plug
73551/EPD
200mm
190mm
215mm
7 psi
3.9 kilos
73571/EPD
250mm
241mm
270mm
7 psi
5.1 kilos
73581/EPD
300mm
295mm
325mm
7 psi
5.8 kilos