Horobin Limited
Midacre
Willenhall Trading Estate
Willenhall
U.K.
Telephone    : +44 1902 60 40 60
Fax Number : +44 1902 60 33 66
eMail : sales@horobin.co.uk

Test Plugs for Pressure Testing
Polyethylene Pipes - Double Seal

 Cost effective Plug for Temporary Sealing or Testing of Small Bore Pipework. Can be used with small bore copper and steel tubing. Also suitable for plastic tubing.

Suitable for a wide range of Industries - Gas, Water, Oil and Telecommunications. Can also be used for Refrigeration, Air Conditioning, Heating, Process Plant and Food Manufacture.

Double Seal permits greater stability in the Pipe.

Available from 12mm up to 50mm.

Pressure Plates are made of mild steel.
Rubber Seals are commercial grade rubber mouldings. Chemical resistant Rubber Seals can be supplied.
All steel components are Zinc Plated - corrosion resistant to 90 hours salt spray test.

Plugs must be adequately braced to prevent the Plug coming out of the Pipe under pressure and injurying operatives.

Test Plugs for Pressure Testing Polyethylene Pipes up to 6bar including Pressure Gauge
 
Part Number
Nominal Plug Size
Plug will fit Min Pipe Size
Plug will fit Max Pipe Size
Max allowable Back Pressure
Weight of Plug
73815
12mm
12mm
16mm
50 p.s.i.
40 grams
73825
19mm
18mm
24mm
50 p.s.i.
50 grams
73835
25mm
25mm
31mm
50 p.s.i.
70 grams
73845
32mm
32mm
40mm
50 p.s.i.
90 grams
73855
40mm
36mm
52mm
30 p.s.i.
130 grams
73865
50mm
50mm
63mm
30 p.s.i.
160 grams

Test Plugs for Pressure Testing Polyethylene Pipes up to 6bar
 
Part Number
Nominal Plug Size
Plug will fit Min Pipe Size
Plug will fit Max Pipe Size
Max allowable Back Pressure
Weight of Plug
73811/DT
12mm
12mm
16mm
50 p.s.i.
40 grams
73821/DT
19mm
18mm
24mm
50 p.s.i.
50 grams
73831/DT
25mm
25mm
31mm
50 p.s.i.
70 grams
73841/DT
32mm
32mm
40mm
50 p.s.i.
90 grams
73851/DT
40mm
36mm
52mm
30 p.s.i.
130 grams
73861/DT
50mm
50mm
63mm
30 p.s.i.
160 grams